LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PNT1-482 — Illegal manual cycle received

Manufacturer wording — %sIllegal manual cycle received
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PNT1-482 (“Illegal manual cycle received”): For integral color change systems only: An illegal color change cycle number was sent by the PLC. First check: Make sure the PLC is sending a legal color change cycle number.

Updated 2026-09-17 · LogrobotLM reference

Description

For integral color change systems only: An illegal color change cycle number was sent by the PLC. Cycle numbers 1-8, and 21, 22, and 23 are legal cycle numbers for PaintTool version 1.30 and older.

Remedy

Make sure the PLC is sending a legal color change cycle number.

Related codes

PNT1-480… not definedPNT1-481Pushout cycle cancelledPNT1-483Color cycle abortedPNT1-484Color Valve + PrgSol both ON

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →