LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PNT1-487 — Application enable is OFF

Manufacturer wording — %sApplication enable is OFF
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PNT1-487 (“Application enable is OFF”): This message is displayed when the application enable input turns off. First check: None.

Updated 2026-09-17 · LogrobotLM reference

Description

This message is displayed when the application enable input turns off. When this input is off, the gun and color change outputs are blocked from turning on.

Remedy

None.

Related codes

PNT1-485Using default valve cycle dataPNT1-486Selected color valve not definedPNT1-488Attempt to use illegal cycle numberPNT1-489Manaul mode is locked at T.P.

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →