LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm PNT1-518 — %sApplication enable is OFF

FANUC PNT1-518 (“%sApplication enable is OFF”): This message is displayed when the application enable input turns off. First check: None.

Updated 2026-08-29 · LogrobotLM reference

Description

This message is displayed when the application enable input turns off. When this input is off, the GUN and color change outputs are blocked from turning on.

Remedy · Remède

None.

Frequently asked · Questions fréquentes

What does FANUC alarm PNT1-518 mean?
FANUC PNT1-518 (“%sApplication enable is OFF”): This message is displayed when the application enable input turns off. When this input is off, the GUN and color change outputs are blocked from turning on.
How do you troubleshoot FANUC alarm PNT1-518?
None.

Related codes / Codes liés

PNT1-516%sUsing default valve cycle dataPNT1-517%sSelected color valve not definedPNT1-519%sAttempt to use illegal cycle numberPNT1-520%sManaul mode is locked at T.P.

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →