LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PNT1-528 — No system color for valve

Manufacturer wording — %sNo system color for valve
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PNT1-528 (“No system color for valve”): WARNING: For manual color changes from teach pendant, the system changes the current system color to match the fill color valve. First check: Temporarily change the system color setup.

Updated 2026-09-17 · LogrobotLM reference

Description

WARNING: For manual color changes from teach pendant, the system changes the current system color to match the fill color valve. No system color uses the current valve. The wrong system color might be set - and the wrong preset data might be used in wet test cycle.

Remedy

Temporarily change the system color setup.

Related codes

PNT1-526ColorEnb + PrgAir both ONPNT1-527Selected color valve not definedPNT1-529Application enable is ONPNT1-530Invalid Solv/Air State

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →