LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm PNT1-624 — %sTime out during a cal. test

Description

While measuring hysteresis time up or time down, the Closed loop system timed out. This indicates that the high or low flow rate can not be reached consistently.

Remedy · Remède

Retry the calibration. Check that the high flow rate can be reached consistently. If not, an increase in the tolerance band might be required.

Related codes / Codes liés

PNT1-622%s0 air flow rate detectedPNT1-623%sLower output did not lower flowPNT1-625%sMin. output has flow > setpointPNT1-626%sMax. output has flow < setpoint

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique.