LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm PNT1-812 — %sCalibration aborted

FANUC PNT1-812 (“%sCalibration aborted”): The IPC auto calibration aborted. First check: Ensure pumps are operating correctly.

Updated 2026-08-29 · LogrobotLM reference

Description

The IPC auto calibration aborted.

Remedy · Remède

Ensure pumps are operating correctly. Ensure that the delay parameter is set to a sufficient amount.

Frequently asked · Questions fréquentes

What does FANUC alarm PNT1-812 mean?
FANUC PNT1-812 (“%sCalibration aborted”): The IPC auto calibration aborted.
How do you troubleshoot FANUC alarm PNT1-812?
Ensure pumps are operating correctly. Ensure that the delay parameter is set to a sufficient amount.

Related codes / Codes liés

PNT1-810%sPump 2 motor servo not readyPNT1-811%sPump 2 totals differ > tolerancePNT1-813(%s) Non-increasing cal tablePNT1-814(%s) Zero PSI

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →