FANUC Alarm PNT1-836 — Calibration Time Out

Manufacturer wording — %sCalibration Time Out
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PNT1-836 (“Calibration Time Out”): The system timed out and the ServoBell auto calibration aborted when it was trying to determine the empty can position. First check: Clear all faults, and verify that the ServoBell motor is turning during the calibration process.

Updated 2026-09-17 · LogrobotLM reference

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →