LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm PNT1-869 — %sNon-incr cal table

FANUC PNT1-869 (“%sNon-incr cal table”): Calibration aborted due to the output or manifold pressure failing to increase as the command rate increased. First check: Determine the cause for the pressure not increasing, and correct the problem.

Updated 2026-08-29 · LogrobotLM reference

Description

Calibration aborted due to the output or manifold pressure failing to increase as the command rate increased.

Remedy · Remède

Determine the cause for the pressure not increasing, and correct the problem.

Frequently asked · Questions fréquentes

What does FANUC alarm PNT1-869 mean?
FANUC PNT1-869 (“%sNon-incr cal table”): Calibration aborted due to the output or manifold pressure failing to increase as the command rate increased.
How do you troubleshoot FANUC alarm PNT1-869?
Determine the cause for the pressure not increasing, and correct the problem.

Related codes / Codes liés

PNT1-867%sCalibration successfulPNT1-868%sCalibration abortedPNT1-870%sZero PressurePNT1-875%sBad preset index [%d]

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →