FANUC Alarm PNT1-896 — Zero Flow Programmed: …
Manufacturer wording — Zero Flow Programmed: %s
The manual prints placeholders; your controller fills them in with the real group, axis or number.
FANUC PNT1-896 (“Zero Flow Programmed: …”): Zero Flow was programmed in the color change. First check: Ensure that a flow rate is set up in the CC preset data.
Updated 2026-09-17 · LogrobotLM reference
Description
Zero Flow was programmed in the color change.
Remedy
Ensure that a flow rate is set up in the CC preset data.
Related codes
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →