LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm PNT2-054 — No channel/parameter indicated

FANUC PNT2-054 (“No channel/parameter indicated”): The PLC sent a parameter indicator value of 0. First check: Correct the problem at the PLC.

Updated 2026-08-29 · LogrobotLM reference

Description

The PLC sent a parameter indicator value of 0.

Remedy · Remède

Correct the problem at the PLC.

Frequently asked · Questions fréquentes

What does FANUC alarm PNT2-054 mean?
FANUC PNT2-054 (“No channel/parameter indicated”): The PLC sent a parameter indicator value of 0.
How do you troubleshoot FANUC alarm PNT2-054?
Correct the problem at the PLC.

Related codes / Codes liés

PNT2-039I/O setup verified OKPNT2-040Error attempting to setup I/OPNT2-055Manual inputs are enabledPNT2-056Manual inputs are disabled

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →