LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PNT2-152 — Data err:Col … preset %override

Manufacturer wording — Data err:Col %s preset %override
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PNT2-152 (“Data err:Col … preset %override”): System color data has uninitialized percent preset override information. First check: If the error occurs each time the system color table data is accessed, it might be necessary to create new color table data on the controller.

Updated 2026-09-17 · LogrobotLM reference

Description

System color data has uninitialized percent preset override information. This happens when color data created on previous version of software is loaded into the controller.

Remedy

If the error occurs each time the system color table data is accessed, it might be necessary to create new color table data on the controller.

Related codes

PNT2-137Short term Chain abnormalPNT2-151Col … range err/preset %overridePNT2-153Eff. preset range errPNT2-154Color … data access error

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →