LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm PNT2-332 — %s not calibrated

FANUC PNT2-332 (“%s not calibrated”): The calibration status for each control parameter must be complete before it can be used in a program. First check: Calibrate all control parameters used within the current program.

Updated 2026-08-29 · LogrobotLM reference

Description

The calibration status for each control parameter must be complete before it can be used in a program.

Remedy · Remède

Calibrate all control parameters used within the current program.

Frequently asked · Questions fréquentes

What does FANUC alarm PNT2-332 mean?
FANUC PNT2-332 (“%s not calibrated”): The calibration status for each control parameter must be complete before it can be used in a program.
How do you troubleshoot FANUC alarm PNT2-332?
Calibrate all control parameters used within the current program.

Related codes / Codes liés

PNT2-330%sCannot create presetsPNT2-331%sCannot read presets data filePNT2-333%sFailed to continue robot taskPNT2-334%sFailed to pause robot task

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →