LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PNT2-338 — Invalid job received

Manufacturer wording — %sInvalid job received
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PNT2-338 (“Invalid job received”): Multi exposure exceeded the limit. First check: Exposure times calculated for the multi-exposure function exceeded the limit of the exposure time available with the camera.

Updated 2026-09-17 · LogrobotLM reference

Description

Multi exposure exceeded the limit. The number of exposures will be modified at execution.

Remedy

Exposure times calculated for the multi-exposure function exceeded the limit of the exposure time available with the camera. The number of exposures will be different from your setting. Changing the number of exposures or exposure time is recommended.

Related codes

PNT2-336Robot task has faultedPNT2-337Failed to run robot taskPNT2-339Invalid tutone receivedPNT2-340Invalid repair received

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →