LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PNT2-352 — Failed to continue robot task

Manufacturer wording — %sFailed to continue robot task
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PNT2-352 (“Failed to continue robot task”): An attempt to continue the robot motion task has failed. First check: Current cycle must be aborted.

Updated 2026-09-17 · LogrobotLM reference

Description

An attempt to continue the robot motion task has failed.

Remedy

Current cycle must be aborted.

Related codes

PNT2-350Cannot read presets data filePNT2-351… not calibratedPNT2-353Failed to pause robot taskPNT2-354Failed to abort robot task

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →