FANUC Alarm PNT2-359 — Invalid repair received
Manufacturer wording — %sInvalid repair received
The manual prints placeholders; your controller fills them in with the real group, axis or number.
FANUC PNT2-359 (“Invalid repair received”): An invalid repair option was received from the PLC. First check: The PLC must init the robot with a valid repair option.
Updated 2026-09-17 · LogrobotLM reference
Description
An invalid repair option was received from the PLC.
Remedy
The PLC must init the robot with a valid repair option.
Related codes
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →