LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PNT2-429 — Applicator test outputs are OFF

Manufacturer wording — %sApplicator test outputs are OFF
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PNT2-429 (“Applicator test outputs are OFF”): Applicator test outputs are OFF and have been terminated by the PLC. First check: None.

Updated 2026-09-17 · LogrobotLM reference

Description

Applicator test outputs are OFF and have been terminated by the PLC.

Remedy

None.

Related codes

PNT2-420Error reading gun-on time for jobPNT2-428Applicator test outputs are ONPNT2-434Applicator test outputs are ONPNT2-441Part entered tracking window

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →