FANUC Alarm PNT2-498 — Application enable is ON
Manufacturer wording — %sApplication enable is ON
The manual prints placeholders; your controller fills them in with the real group, axis or number.
FANUC PNT2-498 (“Application enable is ON”): This message is displayed when the application enable input turns ON. First check: None.
Updated 2026-09-17 · LogrobotLM reference
Description
This message is displayed when the application enable input turns ON. When this input is ON, the GUN and color change outputs are allowed to turn ON.
Remedy
None.
Related codes
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →