LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PNT2-502 — CC Event Timeout!

Manufacturer wording — %sCC Event Timeout!
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PNT2-502 (“CC Event Timeout!”): The Color Change Event programmed for the current color change step did not complete in the allocated time. First check: Check the Color Change Event requests.

Updated 2026-09-17 · LogrobotLM reference

Description

The Color Change Event programmed for the current color change step did not complete in the allocated time.

Remedy

Check the Color Change Event requests.

Related codes

PNT2-500Purge Solvent + Air Both ONPNT2-501More Than One Color Valve ONPNT2-503CC Cycle does not end @ HOME!PNT2-514Color cycle aborted

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →