LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PNT2-528 — No system color for valve

Manufacturer wording — %sNo system color for valve
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PNT2-528 (“No system color for valve”): Manual color change from teach pendant. First check: Temporarily change the system color setup.

Updated 2026-09-17 · LogrobotLM reference

Description

Manual color change from teach pendant. Warning: the system changes the current system color to match the fill color valve. No system color uses the current valve. The wrong system color might be set - and the wrong preset data might be used in the wet test cycle.

Remedy

Temporarily change the system color setup.

Related codes

PNT2-526ColorEnb + PrgAir both ONPNT2-527Selected color valve not definedPNT2-529Application enable is ONPNT2-530Invalid Solv/Air State

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →