LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm PNT2-554 — %sCal. table adapted out tolerance

Description

The fluid pressure or fluid viscosity for the current color has changed dramatically. This change has occurred since the last calibration of this color. The change was beyond the percentage value setting of the Adaptive tolerance parameter.

Remedy · Remède

Correct the fluid pressure or viscosity for the current color. If the pressure or viscosity was purposely changed then the color can be calibrated to eliminate this alarm. The setting for the Adaptive tolerance can be increased if the variation shown by the calibration table for this color is accepatable.

Related codes / Codes liés

PNT2-534%sCC Cycle does not end @ HOME!PNT2-535%sIPC Interlock check failed!PNT2-555%sCal. table adapted in tolerancePNT2-556Dyn. yield > tolerance band (%s)

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique.