LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm PNT2-572 — %sFast fluid flow leak detected

Description

A large amount of fluid flow was detected when the gun was not turned on. This might be caused by the dump valve being stuck on or a broken fitting, broken paint line, etc. Note that each time the fluid begins to leak fast the color valve will be turned off. This will prevent the robot from spraying the part.

Remedy · Remède

The various fluid lines and valves should be inspected and repaired immediately. Check the dump pilot valve and the dump valve and repair them if necessary.

Related codes / Codes liés

PNT2-570%sRequested flow above cal. tablePNT2-571%sSlow fluid flow leak detectedPNT2-573%sFailed to reach setpointPNT2-574%sAccuflow softpart init failed

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique.