LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PNT2-584 — Cal. table adapted in tolerance

Manufacturer wording — %sCal. table adapted in tolerance
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PNT2-584 (“Cal. table adapted in tolerance”): This status warning indicates that the conditions which caused a table adapted out of tolerance alarm have been eliminated or disappeared. First check: None.

Updated 2026-09-17 · LogrobotLM reference

Description

This status warning indicates that the conditions which caused a table adapted out of tolerance alarm have been eliminated or disappeared.

Remedy

None.

Related codes

PNT2-577CH1:Dyn. yield > tolerance bandPNT2-583Cal. table adapted out tolerancePNT2-585CH2:Dyn. yield > tolerance bandPNT2-586Flow rate average error high

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →