FANUC Alarm PNT2-702 — Requested speed over valid range

Manufacturer wording — %sRequested speed over valid range
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PNT2-702 (“Requested speed over valid range”): The requested turbine speed output command is above the range that is considered valid. First check: Adjust the turbine speed command that is used in the preset table so it is within an acceptable range.

Updated 2026-09-17 · LogrobotLM reference

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →