FANUC Alarm PNT2-853 — Non-incr cal table

Manufacturer wording — %sNon-incr cal table
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PNT2-853 (“Non-incr cal table”): Calibration aborted due to the Output or Manifold pressure failing to increase as the command rate increased. First check: Determine cause for the pressure not increasin, correct the problem, and retry the operation.

Updated 2026-09-17 · LogrobotLM reference

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →