LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PRIO-291 — FL-net Node … Leave network

Manufacturer wording — FL-net Node %d Leave network
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PRIO-291 (“FL-net Node … Leave network”): The node with the node number displayed in the message was disconnected from the network. First check: Check the node which was disconnected from the network by confirming the device settings and cable connection.

Updated 2026-09-17 · LogrobotLM reference

Description

The node with the node number displayed in the message was disconnected from the network.

Remedy

Check the node which was disconnected from the network by confirming the device settings and cable connection.

Related codes

PRIO-289FL-net My Node Enter networkPRIO-290FL-net My Node Dupulicate AdrPRIO-292FL-net Node … Enter networkPRIO-293FL-net Dupulicate Area Adr …

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →