LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PRIO-608 — PNIO(D) mismatch slot … …

Manufacturer wording — PNIO(D) mismatch slot %d %d
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PRIO-608 (“PNIO(D) mismatch slot … …”): The reported module with slot number and subslot number does not match the configuration of project file downloaded to I/O Controller. First check: Check the setting in the setup module detail screen.

Updated 2026-09-17 · LogrobotLM reference

Description

The reported module with slot number and subslot number does not match the configuration of project file downloaded to I/O Controller.

Remedy

Check the setting in the setup module detail screen. Check the project file.

Related codes

PRIO-606PNIO(D) abort indication …PRIO-607PNIO(D) offline indication …PRIO-610PNIO(C) open error …PRIO-611PNIO(C) alarm indication …

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →