LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm RPM-005 — memory allocation failed

FANUC RPM-005 (“memory allocation failed”): There is not enough cmos memory for this rpm segment First check: Increase the cmos memory by deleting unused TPE Or increase pitch value so that rpm do not need so much cmos space.

Updated 2026-09-17 · LogrobotLM reference

Description

There is not enough cmos memory for this rpm segment

Remedy

Increase the cmos memory by deleting unused TPE Or increase pitch value so that rpm do not need so much cmos space.

Related codes

RPM-001WARN n_buffers invalidRPM-002WARN record_size invalidRPM-009segment not in bufferRPM-013invalid buffer no

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →