LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm SEAL-077 — WARN Sealer equipment fault (E…)

Manufacturer wording — WARN Sealer equipment fault (E%d)
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC SEAL-077 (“WARN Sealer equipment fault (E…)”): An unknown error code was received from the dispensing controller. First check: Check the dispensing controller for an error condition.

Updated 2026-09-17 · LogrobotLM reference

Description

An unknown error code was received from the dispensing controller.

Remedy

Check the dispensing controller for an error condition. Also check the communication link between the dispensing controller and robot controller.

Related codes

SEAL-075WARN Flow meter fault (E…)SEAL-076WARN Bead defect detected (E…)SEAL-078WARN Dispenser comm fault (E…)SEAL-079WARN Dispenser E-stop (E…)

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →