FANUC Alarm SEAL-220 — WARN Volume out of range (E…)
Manufacturer wording — WARN Volume out of range (E%s)
The manual prints placeholders; your controller fills them in with the real group, axis or number.
FANUC SEAL-220 (“WARN Volume out of range (E…)”): The volume dispensed in the last job was out of the normal volumetric range of material dispensed for this job. First check: This warning is normal if it was caused by terminating a job early.
Updated 2026-09-17 · LogrobotLM reference
Description
The volume dispensed in the last job was out of the normal volumetric range of material dispensed for this job. This could be caused by terminating the job early, causing much less material to be dispensed. This could also be caused by problems with the material, such as using material which has exceeded its shelf life.
Remedy
This warning is normal if it was caused by terminating a job early. If this error happens during
Related codes
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →