LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm SPOT-026 — PAUSE Reset welder timeout …

Manufacturer wording — PAUSE Reset welder timeout %s
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC SPOT-026 (“PAUSE Reset welder timeout …”): The robot timed out waiting for the weld controller to reset a major fault First check: Check the weld controller for the reason for this alarm.

Updated 2026-09-17 · LogrobotLM reference

Description

The robot timed out waiting for the weld controller to reset a major fault

Remedy

Check the weld controller for the reason for this alarm. Reset the fault, then chose Skip/Retry option to continue the program.

Related codes

SPOT-024PAUSE BU OPEN DETECT is on …SPOT-025PAUSE Bad pressure (P=…)SPOT-027PAUSE Serial sequence not startedSPOT-028PAUSE Serial initialization failed

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →