FANUC Alarm SPOT-065 — WARN …
Manufacturer wording — WARN %s
The manual prints placeholders; your controller fills them in with the real group, axis or number.
FANUC SPOT-065 (“WARN …”): A weld event has happened on the weld controller. First check: This is logging information only.
Updated 2026-09-17 · LogrobotLM reference
Description
A weld event has happened on the weld controller.
Remedy
This is logging information only. No remedy is required.
Related codes
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →