LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm SPOT-241 — PAUSE Gun open fault …-both guns

Manufacturer wording — PAUSE Gun open fault %s-both guns
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC SPOT-241 (“PAUSE Gun open fault …-both guns”): This error is only posted for set/reset type guns. First check: Check the setting of the shot pin.

Updated 2026-09-17 · LogrobotLM reference

Description

This error is only posted for set/reset type guns. The shot pin was not correctly set, so the gun could not be opened.

Remedy

Check the setting of the shot pin. Make sure the shot pin has been made before attempting to close the gun.

Related codes

SPOT-236PAUSE Reset welder timeout …-both gunsSPOT-240PAUSE Gun contactor fault …-both gunsSPOT-242PAUSE Gun close fault …-both gunsSPOT-243PAUSE Backup open fault …-both guns

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →