LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm SYST-210 — Process Sync Time-out error

FANUC SYST-210 (“Process Sync Time-out error”): The process synchronization condition was not satisfied within the specified time-out limit. First check: 1. Check the program logic (for a seq_id inconsistency, for example).

Updated 2026-09-17 · LogrobotLM reference

Description

The process synchronization condition was not satisfied within the specified time-out limit.

Remedy

1. Check the program logic (for a seq_id inconsistency, for example). 2. Specify a longer time-out limit (in the synchronization schedule).

Related codes

SYST-207Message posted at Rob#…SYST-208Feature NOT supportedSYST-211Comm processor Time-out errorSYST-212Need to apply to DCS param

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →