LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm SYST-282 — Auto mode input is ON[P]

FANUC SYST-282 (“Auto mode input is ON[P]”): This error happens only when using M-TP(J897). First check: When changing to Teaching mode, set Auto mode input to OFF.

Updated 2026-09-17 · LogrobotLM reference

Description

This error happens only when using M-TP(J897). When changing to Teach mode, Auto mode input is ON.

Remedy

When changing to Teaching mode, set Auto mode input to OFF.

Related codes

SYST-280Operating panel is Teach mode[P]SYST-281Teaching mode input is ON[P]SYST-283Don't run program[P]SYST-284Starting Auto Backup[P]

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →