LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm VISN-075 — ABORT 3DGP No Vision Hardware Installed

FANUC VISN-075 (“ABORT 3DGP No Vision Hardware Installed”): No vision boards installed. First check: Make sure that the vision boards are installed and the V-400i software is loaded.

Updated 2026-09-17 · LogrobotLM reference

Description

No vision boards installed. The operator attempted to set the Use Internal Hardware flag or the idle active flag from the Host Simulator menu, but the V-400i software has not been loaded on the controller.

Remedy

Make sure that the vision boards are installed and the V-400i software is loaded.

Related codes

VISN-073ABORT 3DGP Vision Code Not LoadedVISN-074ABORT 3DGP Task Not ActiveVISN-076ABORT 3DGP Package Not RunningVISN-077ABORT 3DGP Library Nest Error

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →