KUKA Error 1301 — PROCEDURE ERROR
InfoDisplayed as KSS01301 on KRC4 / KRC5 controllers
KUKA 1301 (“PROCEDURE ERROR”): Transmission error during the LSV2 procedure that was not detected by the parity check. First check: Repeat the transmission.
Updated 2026-09-09 · LogrobotLM reference
Cause
Transmission error during the LSV2 procedure that was not detected by the parity check.
Troubleshooting
Repeat the transmission. Increase the procedure repeat counter. Check the cable.
Related codes
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →