LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

KUKA Error 1495 — FILLING TIME EXCEEDED

Error

Displayed as KSS01495 on KRC4 / KRC5 controllers

KUKA 1495 (“FILLING TIME EXCEEDED”): The maximum time for filling the dosing unit with adhesive has been exceeded. First check: Check the adhesive equipment.

Updated 2026-09-09 · LogrobotLM reference

Cause

The maximum time for filling the dosing unit with adhesive has been exceeded. The check is performed from a PLC user program (bonding technology). The time for filling the dosing unit with adhesive is monitored by the PLC. If a maximum time is exceeded, there is a fault in the adhesive equipment.

Effect

Stop via braking ramp. All active commands are inhibited.

Troubleshooting

Check the adhesive equipment.

Related codes

1496ADHESIVE LEVEL1493CHANNEL READY FOR PROGRAMMING CONSOLE1497ALL ANALOG FUNCTIONS IN USE1492CHANNEL INCOMPATIBLE WITH THE PROTOCOL

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →