LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

KUKA Error 1571 — TOTAL TRANSMISSION RATE EXCEEDED

Info

Displayed as KSS01571 on KRC4 / KRC5 controllers

KUKA 1571 (“TOTAL TRANSMISSION RATE EXCEEDED”): The total transmission rate of the two channels has been exceeded (limited to 19200 baud). First check: Correct the transmission rate.

Updated 2026-09-09 · LogrobotLM reference

Cause

The total transmission rate of the two channels has been exceeded (limited to 19200 baud).

Troubleshooting

Correct the transmission rate.

Related codes

1570INCORRECT PARAMETER VALUE1572PROTOCOL TIMEOUT EXCEEDED1569PARAMETER CHANGE NOT POSSIBLE, CHANNEL OCCUPIED1573ICPU SYNTAX ERROR

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →