ABB Error 0701 — Drive fault
ErrorABB 0701 (“Drive fault”): 'FAULTRES-N' status bit error on the logic bus of the drive rack. Likely part: Drive (Drive).
Updated 2026-10-22 · LogrobotLM reference
What it means
'FAULTRES-N' status bit error on the logic bus of the drive rack.
What to check
- Replace the robot computer board or check the drive rack.
- Note: Equivalent to the axis drive fault signal (33312) on S4.
Part to check / replace
ABB 0701 points to the hardware below — start here before ordering.
Tap a part for every code that points to it — and verify the exact variant for your controller before ordering.
Related codes
Same hardware involved
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →