ABB Error 10039 — SMB memory is not OK

What it means · Ce que ça veut dire

SMB memory is not OK — ABB robot hardware event on the SMB memory is not OK (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

During startup, the system has found that data in the Serial Measurement Board (SMB) memory is not OK. All data must be OK before automatic operation is possible. Manually jogging the robot is possible. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the SMB memory is not OK, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : There are differences between the data stored on the SMB and the data stored in the controller.
• This may be due to replacement of SMB, controller or both.
• 1) Update the Serial Measurement Board data as detailed in Operator's Manual, IRC5.

Frequently asked · Questions fréquentes

What does ABB error 10039 mean?

ABB 10039 (“SMB memory is not OK”): SMB memory is not OK — ABB robot hardware event on the SMB memory is not OK (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 10039?

Inspect the SMB memory is not OK, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés