ABB Error 10195 — Protected area not done

What it means · Ce que ça veut dire

Protected area not done — ABB robot hardware event on the Protected area not done (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

A power fail did occur in the middle of a protected area for the task arg . All tasks are reset and all user programs are lost. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Protected area not done, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Try to save the user program and do a warm start of the system

Frequently asked · Questions fréquentes

What does ABB error 10195 mean?

ABB 10195 (“Protected area not done”): Protected area not done — ABB robot hardware event on the Protected area not done (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 10195?

Inspect the Protected area not done, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés