ABB Error 110013 — Application process interrupted

What it means · Ce que ça veut dire

Application process interrupted — ABB robot hardware event on the Application process interrupted (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Task: arg The application process was not terminated properly. arg Eventual post-motion phases were not executed. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Application process interrupted, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : 1.
• Logical RAPID instructions in a sequence of application movement instructions consuming too much execution time.
• The last instruction in the sequence of application movement instructions, that does not indicate the sequence end.
• Remove the logical instructions, that cause the delay, or check, that the last application movement instruction indicates, that it is the last one.

Frequently asked · Questions fréquentes

What does ABB error 110013 mean?

ABB 110013 (“Application process interrupted”): Application process interrupted — ABB robot hardware event on the Application process interrupted (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 110013?

Inspect the Application process interrupted, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés