ABB Error 110105 — Invalid weave height

What it means · Ce que ça veut dire

Invalid weave height — ABB robot hardware event on the Invalid weave height (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Task: arg The weave height used is invalid: (0 - 1) [m] Recommended actions Correct the component height Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Invalid weave height, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.

Frequently asked · Questions fréquentes

What does ABB error 110105 mean?

ABB 110105 (“Invalid weave height”): Invalid weave height — ABB robot hardware event on the Invalid weave height (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 110105?

Inspect the Invalid weave height, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés