ABB Error 110627 — Invalid plate thickness

What it means · Ce que ça veut dire

Invalid plate thickness — ABB robot hardware event on the Invalid plate thickness (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Task: arg Invalid value of the plate thickness parameter in forcedata. Allowed values are: 0 to max arg mm. Current value: arg mm. It will not be possible to run any spot instructions until this value is changed. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Invalid plate thickness, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Change the value of the plate thickness parameter in forcedata.

Frequently asked · Questions fréquentes

What does ABB error 110627 mean?

ABB 110627 (“Invalid plate thickness”): Invalid plate thickness — ABB robot hardware event on the Invalid plate thickness (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 110627?

Inspect the Invalid plate thickness, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés