ABB Error 110650 — Search error

What it means · Ce que ça veut dire

Search error — ABB robot hardware event on the Search error (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Task: arg Touch up error, no surface, or sensor signal was found during the search sequence. Current gun: arg The tool will not be updated. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Search error, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : Check for missing or wrong tips and the reference plate is located in the correct position.
• Check that the correct tips are mounted on the gun.
• 2.Check that the reference plate is in the correct position, or check that sensor is working properly.
• Increase the 'MeasureWearL movein distance' parameter.
• Configuration/Process/Spot SoftWare Equalizing

Frequently asked · Questions fréquentes

What does ABB error 110650 mean?

ABB 110650 (“Search error”): Search error — ABB robot hardware event on the Search error (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 110650?

Inspect the Search error, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés