ABB Error 110671 — Module not saved

What it means · Ce que ça veut dire

Module not saved — ABB robot hardware event on the Module not saved (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Task: arg Could not save the module arg . The module arg was not saved. Data needed for the process was not saved and will be lost if Reset RAPID is done. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Module not saved, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : The module does not exist, or the disk is full or the file is write protected.
• Check that the module exists in the specified location on the disk.
• Try to save the module manually from the FlexPendant.

Frequently asked · Questions fréquentes

What does ABB error 110671 mean?

ABB 110671 (“Module not saved”): Module not saved — ABB robot hardware event on the Module not saved (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 110671?

Inspect the Module not saved, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés