ABB Error 110711 — Cable Capteur fault
ErrorABB 110711 (“Cable Capteur fault”): Physical short circuit detected on the welding current feedback signal. Likely part: Câble Capteur (cable Capteur).
Updated 2026-10-22 · LogrobotLM reference
What it means
Physical short circuit detected on the welding current feedback signal.
What to check
- Replace the crushed measurement cable or welding current sensor.
- Note: Similar to drive wiring short circuits.
Part to check / replace
ABB 110711 points to the hardware below — start here before ordering.
Tap a part for every code that points to it — and verify the exact variant for your controller before ordering.
Related codes
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →