ABB Error 110715 — Current is too high, weld 1 to 3.

What it means · Ce que ça veut dire

Current is too high, weld 1 to 3. — ABB robot hardware event on the Current is too high, weld 1 to 3. (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Task:arg arg Current measured exceeds tolerance band: - programmed value jump to lower current values - handling of different sheet thicknesses or sheet layers - variant electrode pressure conditions - variant resistances (impedance) in secondary circuit, e.g. shunt resistor - mains voltage fluctuations. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Current is too high, weld 1 to 3., its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Increase tolerance band, reduce programmed value jumps - use several programs with different parameters - check electrode force system check secondary circuit - increase tolerance band, ensure constant conditions.

Frequently asked · Questions fréquentes

What does ABB error 110715 mean?

ABB 110715 (“Current is too high, weld 1 to 3.”): Current is too high, weld 1 to 3. — ABB robot hardware event on the Current is too high, weld 1 to 3. (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 110715?

Inspect the Current is too high, weld 1 to 3., its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés