ABB Error 110718 — Weld time is too long, weld 1 to 3.

What it means · Ce que ça veut dire

Weld time is too long, weld 1 to 3. — ABB robot hardware event on the Weld time is too long, weld 1 to 3. (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Task:arg arg The permitted time tolerance is exceeded. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Weld time is too long, weld 1 to 3., its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Check setting at Operation - Modify - Programming - Welding parameters - Time monitoring.

Frequently asked · Questions fréquentes

What does ABB error 110718 mean?

ABB 110718 (“Weld time is too long, weld 1 to 3.”): Weld time is too long, weld 1 to 3. — ABB robot hardware event on the Weld time is too long, weld 1 to 3. (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 110718?

Inspect the Weld time is too long, weld 1 to 3., its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés