ABB Error 111518 — BullsEye IO Error

What it means · Ce que ça veut dire

BullsEye IO Error — ABB robot hardware event on the BullsEye IO Error (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

BullsEye attempted to reconnect a previously connected IO signal. Input Name: arg Tool: arg Task: arg Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the BullsEye IO Error, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• If problem persists, run the BESetupToolJ instruction to reinitialize the tool.

Frequently asked · Questions fréquentes

What does ABB error 111518 mean?

ABB 111518 (“BullsEye IO Error”): BullsEye IO Error — ABB robot hardware event on the BullsEye IO Error (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 111518?

Inspect the BullsEye IO Error, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés